Model: XVT-81U1SG
Protocol
| Standards | : IEEE802.3 10Base-T : IEEE802.3u 100Base-TX : IEEE802.3ab 1000Base-T : IEEE802.3z 1000Base-SX/LX Standards : IEEE802.1W Spanning Tree : IEEE802.3x Flow Control |
Fiber Port Characteristic
| Connector Type | : SFP Slot |
| Transmission Rate | : 1.25Gbps |
| Transmission Distance | : Multi-Mode: 550m/2km; : Single-Mode: 2/20/40/60/80/100km |
| Wave Length | :Multi-Mode: 850nm/1310nm : Single-Mode: 1310nm/1550nm/1490nm |
Ethernet Port Characteristic
| Connector Type | : 1×4 RJ45, 1×1 RJ45 |
| Transmission Rate | : 10/100Mbps Auto-Negotiate : 10/100/1000Mbps Auto-Negotiate |
| Transmission Distance | : 10Base-T : <250m (CAT 3,4,5 UTP) : 100Base-TX : <100m (CAT 3,4,5 UTP) : 1000Base-T : <100m (CAT 3,4,5 UTP) |
Exchange Performance
| Forward Method | : Store-And-Forward (Full Wire-Speed) |
| Transmission Mode | : Half/Full Duplex Adaptive |
| MAC Address Table | : 2k |
| Case Space | : 1Mb |
| Jumbo Frames | : 9216b |
| Packet Forwarding Rate | : 4.1664mpps@64byte |
| Bandwidth | : 5.6G (Non-Blocking) |
LED Indicator
| Power indicator | : Green, Power |
| Fiber indicator | : Green Per SFP Optical fiber port |
| Link/Act indicator | : Yellow Per Ethernet port |
| PoE indicator | : Extend Per PoE port |
DIP Switch
| 100m | : Standard Mode- All Port can communicate with Each Other |
| 250m | : Extend Mode, Port 1-8 is isolated from each other, transmission distance can up to 250m, and can communicate with port 9-10. |
Power Parameters
| Input Voltage | : AC100~240V, 50Hz |
| Power Consumption | : Standby: <2W; Whole: <65W |
| PoE Pin | : 1/2+ , 3/6- |
| The Port Max Rate | : <25.4W |
Environment
| Operating temperature | : -20°C ~ 60°C |
| Storage Temperature | : -40°C ~ 85°C |
| Operating Humidity | : 5% ~95% Non-Condensing |
| Heat Dissipation Method | : Natural Heat Dissipation |
Physical Properties
| Size | : 201 x 140 x 44mm |
| Weight | : Net Weight: 0.7Kg, Gross Weight: 0.9Kg |
